Transparent static dissipative, self-adhesive Polyester film. It includes a special coating on one side and a release film on the other side.
9800 ESD film is a transparent, static dissipative, self-adhesive polyester film. It includes a special coating on one side and a release film on the other side. The film can be applied to flat, insulating surfaces.
|Property||Test method||Unit||(100 microns)|
|Elongation at break|
|Hardness||ASTM D-3363||Hardness scale||3H|
|Transmittance – Total visible||ASTM D-1003||%||85|
|Transmittance – Total UV||10|
MD = Machine Direction | TD – Transversal Direction
|Property||Test standard||Typical value||Requirements|
|Surface resistance RS||EN 61340-2-3||106 –108 Ω||1 x 104 RP 1 x 1010 Ω EN 61340-5-1|
|Point to point resistance RP|
Samples were immersed in the specified chemicals for 24 hours at room temperature and then examined visually.
|Chemical||Surface damage||Visual evaluation|
|30% Sulphuric acid||None||Clear|
|30% Nitric acid||None||Clear|
For easy manual application of the foil we have developed a new Micro Suction Silicone adhesive. This adhesive has a number of advantages that make the film easy to position. Our advise is to use standard adhesive only for laminating machines or very very experienced people, else use this new Micro Suction Silicone Adhesive
Please note : ESD foil with Micro Suction Silicone adhesive has a thickness of 230 micron / 0.23 mm.
Please note: in exceptional cases, the top layer can be affected by acids, for example from the human skin. To protect the conductive layer, you can apply a transparent film or use the adhesive side on top.
Small optical defects are allowed in this product. If you require a product that is absolutely free from optical defects, please contact us for the “superior selected quality”. Due to the extreme caution needed to produce these products, they can be several times more expensive.