PET film deposited with copper grid and protected with a nickel layer for EMI shielded windows & displays. High light transmission, excellent EMI shielding.
his transparent conductive Metal Mesh PET film is optical PET film deposited with copper grid and protected with a nickel layer. This film conducts better than our best 9900 series Transparent shielding foil and is only a fraction less transparent. This film has a conductive layer with a very fine etched mesh that is one with the transparent carrier.
Transparent conductive Metal Mesh PET film remains very high transparency, this film is extreme low resistance for high frequency EMI shielding application and is easy to apply. The copper mesh is almost invisible.
Protective film + EMI shielding layer + optional adhesive (option A) + release layer. Due to the random structure none or almost no moire effect is visible when applied to an display.
|Basic thickness||75~100 μm||Thickness tester|
|Adhesion strength||500~1500 gf/25 mm||To glass|
|Adhesion between PET and conductive layer||Grade 2||GB-9286-88|
|Shielding||30 MHz 60 dB
100 MHz 51 dB
200 MHz 45 dB
500 MHz 42 dB
1000 MHz 37 dB
|Based on SJ 20524-1995 Electronics military standard, tested by PLA (People Republic Army)|
|See our Guarantee.|
|Item||Unit||Performance index||Detection method||remark|
|85 Mesh/OPI||250 Mesh/OPI|
|Thickness||Protective film||μm||50 – 60||ASTM D374||Material:PE|
|EMI Shielding Layer||μm||100±5||Material:PET|
|Adhesive||μm||20±5||Optical acrylic adhesive gum|
|Mesh shape||45° quadrate|
|Visible Light Transmittance||%||≥80||≥40||GB/T 2410-2008|
|Surface resistance (conductive side)||Ω / □||≤0.2; ≤0.4; ≤ 0.6||≤0.1||85 Mesh : four point probe
250 Mesh : CDE resmap
|adhesive force (conductive side)||At least two-stage||GB/T 9286-1998|
|Gum peel strength||g/25mm||≥100||GB/T 2792-1998||For glass panel|
|wet-hot resisting performance||resistance variation||%||≤30||65 °C, 90%, 100 hours||ΔR/R0|
|Light transmittance change||%||≤5||ΔT/T0|
|Shielding Effectiveness||In 30 MHz ~ 1000 MHz damping capacity ≥ 30 dB||SJ 20524-1995|
For easy manual application of the foil we have developed a new Micro Suction Silicone adhesive. This adhesive has a number of advantages that make the film easy to position. We advise to use standard adhesive only for laminating machines or very very experienced people else use this new Micro Suction Silicone Adhesive
Please note : Copper grid PET film with Micro Suction Silicone adhesive has a thickness of 230 micron / 0.23 mm.
Please note: top layer can be affected by acid for example from human skin. To protect the conductive layer, you can apply a transparent film or use the adhesive side on top.
Small optical defects are allowed in this product. If you require a product that has absolutely no optical defect then contact us for the “superior selected quality”. Please realize that due to the extreme caution needed for production of these products they can be several times more expensive.